Getting to know and using the machine
C/52
Model E.T. PEGASUS
- CAUTION: - Read the SAFETY REGULATIONS (in this manual) carefully for the safety of all personnel and the machine.
Disengage the parking brake with the engine off negative
(Pegasus 38.16)
1° Position a screwdriver as in the gure (g.94/C).
2° Use a rubber mallet to strike the handle of the screwdriver.
3° Now the parking brake is disengaged and will re-engage
automatically on engine start-up. In these conditions it
is possible to tow the vehicle. To put the brake back into
operational conditions, just start the engine.
(g.94/C)
(g.95/C) Parking brake engaged
(g.96/C) Parking brake disengaged
To Next Page
Loading...