INTRODUCTION
The aim of this manual is to provide the operator with instructions
for efcient and safe use and maintenance of the telehandler.
Following these instructions carefully will allow you to obtain
full efciency and a long working life from your machine, and
will help to make your work considerably easier.
Furthermore, this Use and Maintenance manual is supplied
to you directly by the Dealer upon delivery of the machi-
ne, to ensure you understand all the instructions correctly.
However, should you have trouble understanding any part
of this manual, do not hesitate to contact your nearest De-
aler for clarification, as it is of utmost importance that the
operation and maintenance guidelines are fully understood
and carefully observed. Routine maintenance should be car-
ried out regularly. Keep a record of machine working hours.
When spare parts are required, always use original spare
parts. These can be supplied by your local Dealer who can
also provide advice and instructions for their installation and
use. The use of non-original spare parts may cause damage
to other parts of the machine; we therefore advise our cu-
stomers to purchase any spare parts required only from an
authorised Agent or Dealer.
Should the machine be destined for use in particularly se-
vere conditions (for example in very dusty environments or
sites, or on very clayey or muddy terrain), we advise consul-
ting your nearest dealer for specic instructions. Failure to
observe these instructions may void the machine warranty.
This manual has been published for worldwide distribution
and the availability of certain equipment referred to from
time to time as being essential or available on request may
vary according to where the machine is being used. You can
obtain all necessary details about the equipment available in
your area from your nearest Distributor or Dealer.
Due to manufacturing demands, machines from the
standard production range may differ slightly from tho-
se mentioned in this manual. The company reserves the
right to make modications without notice.
Because we continually introduce technical improve-
ments and bearing in mind updating and publication
times, the data in this manual may be changed at any
time and therefore should not be considered binding.
In some of the illustrations, panels or guards have been
removed in order to provide a clearer view. Never use
the machine without these panels or guards.
The left and right sides of the machine as referred to in
this manual are to be considered looking at the truck
from the back towards the front, or from the position of
the operator in the driver's seat.
To Next Page
Loading...
