EVERY MODIFICATION MADE TO THE VEHICLE LEADS TO A NEW
VERIFICATION OF CONFORMITY WITH THE 98/37 MACHINERY DI-
RECTIVE. THIS PROCEDURE IS ALSO VALID IN THE CASE OF RE-
PAIRS WITH NON-ORIGINAL SPARE PARTS.
it is proHibited to operate iF tHis manual
Has not been read and understood.
any arbitrary modiFication made to tHe veHicle will absolve dieci From
all liability For damage or injury resulting From sucH modiFication.
to guarantee your saFety and tHat oF otHers, do not modiFy tHe
structure or adjust tHe various veHicle components by yourselF
(Hydraulic pressure, calibration oF limiting devices, engine rotation,
installation oF supplementary attacHments, etc.). tHe same Holds
true For tHe deactivation or modiFication oF saFety systems. in sucH
cases, tHe manuFacturer sHall be absolved From all liability.
tHe images, descriptions, measurements stated in tHis cHapter re-
Fer to standard veHicles.
upon request, your veHicle can be Fitted
witH optional controls and attacHments.
all Functions and procedures concerning tHe operation and
mounting oF tHe veHicle’s attacHments tHat are not described in
tHis manual are strictly Forbidden.
use oF tHe veHicle For purposes diFFerent tHan tHose described in
tHis manual is strictly Forbidden.
it is mandatory to Have read and learned cHapter “b“ (saFety stan-
dards) beFore reading cHapter “c” and using tHe veHicle.
To Next Page
Loading...
