EasyManuals Logo

Dynapac SD2500W User Manual

Dynapac SD2500W
452 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
D 13 49
Item Designation Brief description
76 not used
77 not used
78
Error message
"Serious error"
(red)
Lights up when a serious error has occurred on the engine.
m
Switch off the drive engine immediately!
A
The error code can be called up using the switch
"Call up error / malfunction".
A
Lights up for a few seconds once the ignition has been
switched on for checking purposes.
79
Indicator lamp
Engine coolant
temperature
Lights up when the engine temperature is too high.
m
The engine performance will be throttled down automat-
ically. (Driving mode remains possible). Stop the paver
finisher (drive lever to the centre position), let the engine
cool down while idling. Determine the cause and rectify
if necessary (refer to "Malfunctions" section). After cool-
ing down to normal temperature, the engine will run with
full performance again.
A
Indicates the fault together with the "Error message"
lamp.
80
Indicator lamp
hydraulic filter
Lights up when the hydraulic filter needs replacing.
A
Replace filter element acc. to Maintenance Instructions!
81
High beam indica-
tor (blue)
Lights up when the high-beam headlights are activated.
f
Avoid dazzling the oncoming traffic!
82
Direction of travel
indicator telltale
(green)
Flashes whenever direction of travel indicator is activated.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac SD2500W and is the answer not in the manual?

Dynapac SD2500W Specifications

General IconGeneral
BrandDynapac
ModelSD2500W
CategoryConstruction Equipment
LanguageEnglish

Related product manuals