C 13 9
4 Securing the load
4.1 Securing at the front and at the sides
Step 1: fasten lashing chains at the front
m
Diagonal lashing secures the paver finisher at the front using the lashing points on
the paver finisher and on the low-load trailer.
Fasten the lashing chains as shown.
m
The lashing angles should be "ß" between 6°-55° and "a" between 20°-65°!
Step 2: fasten lashing chainsat the side
m
Diagonal lashing secures the wheeled paver at the front and sides using the lashing
points on the paver finisher and on the low-load trailer. Fasten the lashing chains as
shown.
To Next Page
Loading...
