F 90 3
1.2 Points of maintenance
Central lubrication system (1)
Danger of injuries!
f
Do not reach into the tank when the
pump is running!
f
The central lubrication system must only
be operated with the safety valve in-
stalled!
f
Do not undertake any work on the pres-
sure relief valve during operation!
f
Risk of injury due to escaping lubricant, as the system operates at high pressures!
f
Ensure that the diesel engine cannot be started when working on the system!
f
Observe safety regulations for handling hydraulic systems!
m
Ensure maximum cleanliness when working on the central lubrication system!
The following assemblies' lubricating
points can be automatically supplied
with grease by the central lubrication
system:
- Conveyor
- Auger
- Steering, axles (wheeled pavers)
- Screed (tamper / vibration)
To Next Page
Loading...
Need help?
General
