Dynapac SD2500W - 4.1 Cleaning the hopper; 4.2 Cleaning the conveyor and auger

F 100 5
4.1 Cleaning the hopper
m
Clean the hopper regularly
To clean the hopper, park the vehicle on a smooth surface with the hopper open.
Switch off the engine.
f
Risk from hot surfaces!
f
Hot surfaces and vehicle parts can cause severe injuries!
- Wear your personal safety gear.
- Do not touch hot parts of the vehicle.
- Consult a doctor immediately if injured.
A
Comply with further instructions in the safety manual!
4.2 Cleaning the conveyor and auger
m
Clean the conveyor and auger regularly.
If necessary, let the conveyor and auger run at low speed during cleaning.
f
Danger of being pulled in by rotating or conveying vehicle parts!
f
Rotating or conveying vehicle parts can cause severe or fatal injuries!
- Do not enter the danger zone.
- Do not reach into rotating or conveying parts.
- Only wear close-fitting clothing.
- Comply with the warning and information signs on the vehicle.
A
Comply with further instructions in the safety manual.