B 3
2.1 Vehicle
Construction
The paver finisher has a welded steel frame on which the individual components are
mounted.
The large drive wheels together with the front tandem shaft jointly compensate the
irregularities of the soil and as a result of the suspension of the screed they guarantee
a particularly high paving precision.
The continuously adjustable hydrostatic traction drive allows the speed of the paver
finisher to be matched to all work conditions.
The operation of the paver finisher is considerably facilitated by the automatic mate-
rial handling system, the independent travel drives and the clearly structured operat-
ing components and controls.
The following extra equipment (option) is available:
o Automatic levelling/slope control system
o Ultrasonic sensors for material transfer (controller)
o Additional cut-off shoe
o Larger working widths
o Automatic central lubrication system for the finisher and/or the screed
o Protective roof / cab
o Additional headlights, warning lamps
o Emulsion spraying system
o Fuelling system
o Camera system
o Asphalt fume control system
o 12 volt system
o Reverse buzzer
o Central lubrication system
o Further equipment and upgrade options on request
To Next Page
Loading...
Need help?
General
