C 13 13
5.1 After transportation
- Remove the attachment devices.
- Raise the protective roof (o):
A
See section entitled "Protective roof"
For a paver finisher without roof:
- Mount the exhaust extension pipe.
- Lift the screed to the transportation position.
- Start the engine and drive from the trailer at a low engine/traction speed.
- Park the paver finisher in a secure spot, lower the screed and switch off the engine.
- Remove the key and/or cover the operating panel with the protective hood and se-
cure it.
To Next Page
Loading...
Need help?
General
