Dynapac SD2500W User Manual

F 40 10
Auger blade (8)
A
If the surface of the auger blade (A) be-
comes sharp-edged, the diameter of the
auger is reduced and the blades (B)
have to be replaced.
- Remove the bolts (C), washers (D),
nuts (E) and auger blade (B).
f
Risk of injury due to sharp-edged parts!
m
Auger blades must be installed play-
free; the contact surfaces must be dirt-
free!
- Install the new auger blade (B); re-
place the bolts (C), washers (D) and
nuts (E) if necessary.
A
B
C
D
E
B

Dynapac SD2500W Specifications

General

Brand	Dynapac
Model	SD2500W
Category	Construction Equipment
Language	English