Dynapac SD2500W - Auger blade (5)

F 41 7
Auger blade (5)
A
If the surface of the auger blade (A) be-
comes sharp-edged, the diameter of the
auger is reduced and the blades have to
be replaced.
- Dismantle nuts (B) and bolt (C) and re-
move the worn auger blade.
f
Risk of injury due to sharp-edged parts!
m
Auger blades must be installed play-
free; the contact surfaces must be dirt-
free!
- Install the new auger blade (D); re-
place the bolts (C) and nuts (B).
B
A
C
D