Dynapac SD2500W User Manual

D 20 4
Example: Conveyor / auger capacity (menu 7 / sub-menu 700)
- Turn the encoder (A) until the desired menu appears.
- Press button (B) to call up the set-up menu.
- Turn the encoder (A) again until the selection field (red frame) is positioned over
the desired parameter to be adjusted.
- Press button (B) to activate the selected parameter to be adjusted.
- Set the desired parameter by turning the encoder (A).
- Press button (F) to exit parameter adjustment without saving.
- Press button (B) to confirm the set value.
- Press button (G) to exit the setting menu.
A
The set-up menus stored in various menus can be called up directly by pressing the
relevant function button.

Dynapac SD2500W Specifications

General

Brand	Dynapac
Model	SD2500W
Category	Construction Equipment
Language	English