4-10 DynaVox Technologies
Chapter 4: Working with Pages About Pages
13. To use a picture as the background for the page, complete this
step:
a. Select the Style pull-down menu.
b. Select one of these options:
c. Select the Image button. The Select a Picture File menu will
open.
d. If the picture is already stored in the Images folder in your
primary storage card, select the Images folder in the left
viewport and proceed to step g.
e. If the picture is stored on a USB storage device or secondary
storage card, select the Show All Directories check box.
f. Select the appropriate folder (or the expansion box next to the
appropriate folder) in the left viewport:
• If the picture is on a USB storage device, select
UMS_FOLDER.
• If the picture is on a secondary storage card, select Storage
Card2.
g. Select the picture that you want to use in the right viewport.
h. Select the OK button to close the Select a Picture File menu.
The name of the picture file that you selected will be displayed
on the button in the Make a New Page With: menu.
Centered
Image
Add a selected picture to the center of the
page background. The picture will be
displayed at its original size.
Scaled
Image
Alter the size and proportions of a selected
picture to make it fill the entire page
background.
Tiled Image Fill the page background with copies of a
selected picture at its original size.
Best Fit
Image
Alter the size (but not the proportions) of a
selected picture to make it fill either the
entire height or the entire width of the page
background.
2 Note: If the picture is not already stored in the Images folder on your
primary storage card, connect the USB storage device or
secondary data card that contains the picture to your
MightyMo/MiniMo device.
To Next Page