Electrolux Built-in ovens - Removing the Gas Cocks

SOI 02.10 FV 117/142 599 70 59-01
2.17.8 - REMOVING THE GAS COCKS
To remove the gas cocks:
1 - Remove the ramp (see Chapter 2.17.6 entitled REMOVING THE RAMP).
2 - Unfasten the cock fixing screws (see Fig. 243).
Fig. 243
1 - GAS SUPPLY
PIPE TO BURNER
2 - RAMP ASSEMBLY
FIXING BRACKET
3 - GAS RAMP
4 - BRACKET FIXING
SCREWS
5 - FIXING SCREWS FOR THE
COCKS
6 - COCK FIXING BASE
7 - COCK CONTROL PIN
Fig. 244
1 - COCK CONTROL PIN
2 - COCK
3 - GAS RAMP
4 - GAS SUPPLY
PIPE TO BURNER
5 - FIXING SCREWS FOR THE
COCKS
IMPORTANT: After repositioning the gas cocks perform a test to check for any possible gas leaks.