SOI 02.10 FV 139/142 599 70 59-01
4.2.5 - REMOVING THE GAS SOLENOID VALVE ASSEMBLY
To remove the gas solenoid valve assembly:
1. Remove the upper panels (see chapter 4.2.6).
2. Detach the wires from the solenoid valve assembly (see Fig. 286).
3. Unscrew the gas supply hose fixing nut (see Fig. 286).
4. Unfasten the gas solenoid valve assembly fixing screws (see Fig. 287).
5. Extract the solenoid valve assembly
Fig. 286
1 - OVEN THERMOSTAT
2 - CONNECTOR WIRES
FOR SOLENOID VALVE
ASSEMBLY
3 - GAS SUPPLY PIPE
4 - GAS PIPE FIXING NUT
5 - SOLENOID VALVE ASSEMBLY
6 - SOLENOID VALVE ASSEMBLY
FIXING SCREWS
7 - SAFETY THERMOSTAT
8 - GAS INLET
Fig. 287
1 - SOLENOID VALVE ASSEMBLY
2 - FIXING SCREWS
To Next Page
Loading...
