SOI 02.10 FV 54/142 599 70 59-01
2.6.3.2 - NEW METAL TANGENTIAL FAN INSTEAD OF THE ONE WITH THE
PLASTIC BODY
Due to quality improvements, from January 2010 (serial number 003….) a new metal fan with a
different fixing system has gradually been introduced instead of the fan with the plastic body.
To remove the fan:
1 - Unfasten the fixing screws on the upper panel.
2 - Detach the connection wires for the tangential cooling fan
3 - Unfasten the fan fixing screws (see Fig. 102).
4 - Extract the component.
Fig. 102
1 - FAN ELECTRICAL CONNECTIONS
2 - COOLING FAN WITH METAL BODY
3 - LEFT FIXING SCREW
4 - RIGHT FIXING SCREWS
To Next Page
Loading...
