Electrolux Built-in ovens - Removing the Control Components

SOI 02.10 FV 18/142 599 70 59-01
2.3.2.5 - REMOVING THE CONTROL COMPONENTS
To remove one of the control components, simply:
1. Remove the upper panel.
2. Slide off the control knobs.
3. Unscrew the component fixing screws from the front (see Fig. 30 and 31).
Fig. 30
1 - FIXING SCREWS
FOR THE ENERGY
REGULATOR
2 - PIN FOR THE
KNOB
Fig. 31
1 - CONTROL
PANEL
2 - FIXING SCREW
FOR THE ENERGY
REGULATOR
3 - TORX
SCREWDRIVER
4. Extract the component from the rear (see Fig. 32).
Fig. 32
1 - ENERGY
REGULATOR
2 - PANEL SUPPORT FOR
CONTROL PANEL