Electrolux Built-in ovens - Guarantee Exclusions: Unauthorized Repairs; Appliance Transport for Service; Costs for Built-in Appliance Removal and Replacement; Appliance Replacement Due to Repeated Defects

SOI 02.10 FV 13/142 599 70 59-01
2.3.2.4 - REPOSITIONING THE GLASS FRONT PANEL
To reposition the glass front panel:
1. Wipe off any of the old double-sided adhesive tape residue from the control panel support using
a cloth (use some solvent if necessary (see Fig. 16 and 17).
Fig. 16
1 - OLD DOUBLE-SIDED
TAPE RESIDUE
Fig. 17
2. If the old glass front panel is being repositioned, you will need to wipe off any double-sided
adhesive tape residue that may have built up on the internal side of the front panel
(see Fig. 18).
Fig. 18
1 - OLD DOUBLE-SIDED
TAPE RESIDUE