Electrolux Built-in ovens - Page 134

SOI 02.10 FV 134/142 599 70 59-01
Fig. 277
1 - MOTOR SUPPORT
BRACKET POSITIONED
AT THE REAR
OF THE OVEN
2 - CONVECTION FAN MOTOR
To reposition the convection fan with snap-on joint:
1 - Reposition the anchor tab correctly, lifting it slightly with a Philips screwdriver (see Fig. 278).
Fig. 278
1 - MOTOR SUPPORT
BRACKET POSITIONED
AT THE REAR
OF THE OVEN
2 - PHILIPS SCREWDRIVER
3 - ANCHOR TAB