Electrolux Built-in ovens - Cleaning and Maintenance Procedures; General Cleaning Precautions; Maintenance Safety Disconnection; General Oven Cleaning Methods

SOI 02.10 FV 8/142 599 70 59-01
3. Remove the fixing screws for the control components.
4. Slide the indicator lights out of the front panel towards the inside.
Fig. 6
1 - FIXING SCREWS
FOR COMPONENT.
2 - BEARING FRONT
PANEL.
5. Remove the two rear screws which secure the front panel in place (see Fig. 7).
Fig. 7
1 - FIXING SCREW
FOR FRONT PANEL
(ONE ON EACH SIDE).