Endress+Hauser Proline Promass E 500 - Page 124

Commissioning Proline Promass E 500 PROFIBUS PA
124 Endress+Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output.
• Pulse
• Frequency
• Switch
–
Terminal number – Shows the terminal numbers
used by the PFS output
module.
• Not used
• 24-25 (I/O 2)
• 20-21 (I/O 4)
*
–
Signal mode – Select the signal mode for the
PFS output.
• Passive
• Active
–