Endress+Hauser Proline Promass E 500 - Page 167

Proline Promass E 500 PROFIBUS PA Operation
Endress+Hauser 167
Parameter Prerequisite Description User interface Factory setting
Target mass flow With the following conditions:
Order code for "Application
package", option ED
"Concentration"

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the mass flow that is
currently measured for the
target medium.
Dependency
The unit is taken from: Mass
flow unit parameter
(→  109)
Signed floating-point
number
–
Carrier mass flow With the following conditions:
Order code for "Application
package", option ED
"Concentration"

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the mass flow of the
carrier medium that is
currently measured.
Dependency
The unit is taken from: Mass
flow unit parameter
(→  109)
Signed floating-point
number
–
Target corrected volume flow With the following conditions:
• Order code for "Application
package", option ED
"Concentration"
• The Ethanol in water
option or %mass /
%volume option is selected
in the Liquid type
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the corrected volume
flow that is currently measured
for the target fluid.
Dependency
The unit is taken from the
Volume flow unit parameter
(→  109).
Signed floating-point
number
–
Carrier corrected volume flow With the following conditions:
• Order code for "Application
package", option ED
"Concentration"
• In the Liquid type
parameter, the Ethanol in
water option or %mass /
%volume option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the corrected volume
flow currently measured for
the carrier fluid.
Dependency
The unit is taken from the
Volume flow unit parameter
(→  109).
Signed floating-point
number
–
Target volume flow With the following conditions:
• Order code for "Application
package", option ED
"Concentration"
• The Ethanol in water
option or %mass /
%volume option is selected
in the Liquid type
parameter.
• The %vol option is selected
in the Concentration unit
parameter.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the volume flow
currently measured for the
target medium.
Dependency
The unit is taken from the
Volume flow unit parameter
(→  109).
Signed floating-point
number
–