Section 7 — Voice Parameters EPS-16 PLUS Musician's Manual
EDIT/Filter Page:
Mode (Filter Mode) 7-21
F1 Cutoff Frequency; F2 Cutoff Frequency 7-23
F1 Env2 Amount; F2 Env2 Amount 7-23
F1 Keyboard Amount; F2 Keyboard Amount 7-23
F1 Mod; F1 Mod Amount 7-23
F2 Mod; F2 Mod Amount 7-23
EDIT/Amp Page:
Wavesample Volume; Pan 7-24
Volume Mod; Volume Mod Amount 7-24
Pan Mod; Pan Mod Amount 7-24
A-B-Fade In;C-D Fade Out 7-24
Tutorial — Keyboard Crossfade 7-25
Fadecurve 7-26
Boost 7-26
Out 7-27
EDIT/Layer Page:
Layer Glidemode 7-28
Layer Glidetime 7-28
Legato Layer 7-29
Layer Velocity Lo; Velocity High 7-29
Tutorial — Velocity and Layers 7-30
Pitch Table 7-31
Layer Name 7-31
Delay; Velocity Amount 7-31
Layer Restrike 7-31
COMMAND/Layer Page:
Create New Layer 7-32
Copy Layer 7-32
Delete Layer 7-32
EPS-16 PLUS Voice Configuration
Each EPS-16 PLUS Instrument consists of up to eight Layers, and up to 127
Wavesamples. Each of the Wavesamples within an EPS-16 PLUS instrument
consists of:
• a digital oscillator playing a wave from memory
• two multi-mode digital filters
• one LFO (Low Frequency Oscillator)
• three complex envelope generators for controlling volume, pitch, filter
frequency, etc.
• a versatile matrix modulation scheme with 15 routable modulation sources
The diagram on the following page shows the configuration of one EPS-16
PLUS voice.
7 - 2
Voice Configuration
To Next Page
Loading...
Need help?
General
