Section 11 — Storage Functions
EPS-16 PLUS Musician's Manual
Deleting an Instrument or Bank File from a Disk
Deleting of disk files is done from LOAD mode. To delete (erase) an instrument
or bank from a disk:
• Press Load, then press Instrument.
• Press the Up or Down Arrow button until the file you want to delete is
showing on the display.
• While holding down the Load button, press Cancel•No. The display will
ask DELETE <FILE NAME>?
• Press Enter•Yes.
Loading and Saving EPS-16 PLUS Sequencer Data
There are two ways that EPS-16 PLUS Sequencer data can be stored on a disk:
• SONG File. A song file contains a song and all its related sequences.
Loading a song file from disk will completely erase the current contents of the
EPS-16 PLUS sequencer memory, replacing whatever is there with the song
and sequences from the disk file.
• SINGLE SEQUENCE File. This type of file contains just one sequence.
Loading a single sequence file will not erase the sequencer data already in
memory — the new sequence simply becomes one more sequence in the
internal memory which can be selected or used as a step in a song. There can
be up to eighty sequences in memory at once.
Loading a Song or a Single Sequence from Disk
Both types of sequencer files are accessed from the LOAD/Seq•Song page.
• Press Load, then press Seq•Song.
The LOAD indicator flashes, meaning that the EPS-16 PLUS is showing you
disk files.
• Press the Up or Down Arrow button until the file you want to Load is
- showing on the display:
When a SONG file is showing, the SONG indicator lights next to the SEQ
indicator.
When a SINGLE SEQUENCE file is showing, only the SEQ indicator lights.
• Press Enter•Yes to load the sequencer file showing on the display.
After you have loaded a song or sequence, it is automatically selected. Just
press Play to play it.
11 - 10
Disk Storage
To Next Page
Loading...
Need help?
General
