ENSONIQ EPS-16 PLUS Musician's Manual

EPS-16 PLUS Musician's Manual Section 1 — Getting Started
10) Auxiliary Outputs
The six Auxiliary Outputs (grouped as three stereo pairs) are true polyphonic
outputs, not "voice outputs." EPS-16 PLUS voices are assigned dynamically
among the stereo outputs and the six Auxiliary Outputs, so that any of these
outputs can have up to 20 voices at once if necessary. These three stereo pairs are
controlled via a voice routing parameter on the EDIT/Amp page and are in
addition to the stereo outputs of the EPS-16. Each Wavesample, or an entire
Instrument•Track, can be assigned to any of the three stereo pairs (you can then
use the panning functions to utilize the stereo pairs as solo outputs) or to a spot
within the main stereo mix. See Section 2—System Control and Section 7—
Voice Parameters for more information.
11) Fuse
1 1/2 amp fast-blow fuse socket
12) AC Line In
The supplied line cord should be connected here. The correct voltage for the
EPS-16 PLUS is listed on the Serial Number label on the rear panel. If you
travel, remember that the EPS-16 PLUS will only operate on this voltage.
Rear Panel Connections
1 - 11

ENSONIQ EPS-16 PLUS Specifications

General

Brand	ENSONIQ
Model	EPS-16 PLUS
Category	Recording Equipment
Language	English