ENSONIQ EPS-16 PLUS Musician's Manual

EPS-16 PLUS Musician's Manual Section 7 — Voice Parameters
This parameter determines whether a layer will use a STANDARD (equitempered)
pitchtable, or have middle C across the keyboard (NO PITCH), or will use any
pitch table you create. See the discussion on CREATE PITCH TABLE on the
COMMAND/Pitch page in Section 6 — Wavesample Parameters for more on
creating and editing pitch tables.
You can use the data entry controls to change the name of an existing layer, or
name a new one that you've just created.
The DELAY parameter determines how long voices within the selected layer will
wait after a key is struck before playing. Adjustable from 0 to 5000, with each
value increasing the delay by 1 millisecond.
The VELOCITY AMOUNT is a modulation amount, with velocity serving as the
fixed modulation source. Haider velocities will increase the delay time based on
this amount
This parameter sets the amount of decay voices within the selected layer will have
after they have been restruck. The higher the value, the longer the decay time.
Range: 00 to 99
EDIT/Layer Page
7 - 31

ENSONIQ EPS-16 PLUS Specifications

General

Brand	ENSONIQ
Model	EPS-16 PLUS
Category	Recording Equipment
Language	English