EPS-16 PLUS Musician's Manual Section 1 — Getting Started
• FB-1 and FB-2 FLASHBANKS — FLASHBANKS are a semi-
permanent storage medium for EPS-16 PLUS instrument files. Any
instruments saved to the FLASHBANK can be instantly loaded and will occupy
NO blocks of internal memory. Another nice feature of the FLASHBANK is
that instruments that are saved to it will remain in memory even when the
EPS-16 PLUS is powered down. What this means is that as soon as you
power up, the instruments in the FLASHBANK are ready to use. The FB-1
provides 512k of memory (1024 blocks), FB-2 provides 1 Megabyte (2048
blocks).
• SP-2 SCSI Kit — This SCSI (Small Computer System Interface) kit allows
the EPS-16 PLUS to communicate with a hard drive, CD ROM player, or
computer. Hard drives provide a faster, more convenient way to store
instrument, sequencer, bank, and MIDI files. The SP-2 must be installed by
an Authorized ENSONIQ Repair Station.
An Important Note About EPS-16 PLUS SCSI Connections
ENSONIQ highly recommends that users who wish to add SCSI to their EPS-16
PLUS' use ENSONIQ-made accessories. However, for those wish to purchase a
third-party SCSI kits, there are some important things to know about third-party
SCSI kits and your EPS-16 PLUS' warranty:
• ENSONIQ will not approve any third-party SCSI kits for the
EPS-16 PLUS.
• The use of non-approved third-party products voids the
ENSONIQ warranty. Any third-party product which requires opening the
case must be installed by an Authorized ENSONIQ Repair Station.
Available Accessories
1 - 25
To Next Page
Loading...
Need help?
General
