Table of Contents
EPS-16 PLUS Musician's Manual
Section 2 — System and MIDI Control
EDIT/Systen•MIDI Page
System Parameters:
Free System Blocks 2-2
Free Disk Blocks 2-2
Master Tune 2-2
Global Bend Range 2-2
All Notes Off 2-3
Pedal (Volume/Mod) 2-3
Sustain Foot Switch (Sustain/Patch Select) 2-4
Aux Foot Switch (Start-Stop/Patch Select) 2-4
Auto-Loop Finding (On/Off) 2-4
FX Send Bus2/Bus3 2-5
MIDI Parameters:
MIDI Base Channel 2-6
Transmit On (Instrument Channel/Base Channel) .... 2-7
Base Channel Pressure 2-7
MIDI In Mode 2-7
Global Controllers in MONO Mode 2-8
MIDI Controllers (On/Off) 2-9
MIDI Sys-Ex (On/Off) 2-9
MIDI Program Change (On/Off) 2-9
To Send a Program Change from the EPS-16 PLUS ... 2-9
Receiving Program Changes 2-9
MIDI Song Select 2-10
MIDI XCTRL Number 2-10
Multi Controllers 2-11
COMMAND/System•MIDI Page:
Format Floppy Disk 2-12
Copy O.S. to Disk 2-13
Save Global Parameters 2-14
Load Global Parameters 2-14
Create Directory 2-14
Change Storage Device 2-15
Save Macro File 2-15
Copy Floppy Disk 2-15
Format FLASHBANK 2-16
MIDI Sys-Ex Recorder 2-16
Saving System Exclusive Data from an External Device....... 2-16
Loading System Exclusive Data to an External Device........ 2-17
Write Disk Label 2-17
Load Mirage-DSK Sound 2-18
Converting Mirage Sounds to EPS-16 PLUS Sounds......... 2-18
Format SCSI Drive 2-18
Table of Contents - 2
To Next Page
Loading...
Need help?
General
