ENSONIQ EPS-16 PLUS Musician's Manual

Section 3 — Instruments and Banks EPS-16 PLUS Musician's Manual
Use this command to save the selected instrument to floppy disk (or to a hard
disk). See Section 11 — Storage for more details.
Use this command to save the current bank. See Section 11 — Storage for more
details.
This command is used to create each of the eight Performance Presets within a
bank. See Performance Presets earlier this section for more details.
This command deletes the Effect portion of an instrument. This is a handy
"memory saver." If memory is tight and you're using several instruments
through a single bank effect, deleting the effect from each of the individual
instruments in memory can free up enough memory to squeeze in that final track.
Deleting the effect from an instrument trims about three blocks from its size.
After performing this command, the instrument itself will contain no effect.
However, the instrument can still use the BANK or ROM effects.

ENSONIQ EPS-16 PLUS Specifications

General

Brand	ENSONIQ
Model	EPS-16 PLUS
Category	Recording Equipment
Language	English