EasyManuals Logo

Epiroc SmartROC T40 Maintenance

Default Icon
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
SmartROC T35/T40 17 Compressed Air System
101 No: 7026962571.1.7027002891 en-US
17.3 Check Compressor Oil Level
Precondition
p
The machine is parked on a flat and level surface.
1.
Switch off the machine and allow the oil level to settle for at least 5 minutes.
2.
Check that the indicator on the gauge (A) is in the green zone.
3.
Fill with oil through inlet (B), if necessary. Use the correct amount and oil grade.
17.4 Drain Water Condensation from Compressor Tank
Precondition
p
The machine has been shut down for eight hours.
n
Open the drain plug below the machine and drain off the water.

Table of Contents

Other manuals for Epiroc SmartROC T40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epiroc SmartROC T40 and is the answer not in the manual?

Epiroc SmartROC T40 Specifications

General IconGeneral
BrandEpiroc
ModelSmartROC T40
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals