Epiroc SmartROC T40 Maintenance

SmartROC T35/T40 18 Track Frames
118 No: 7026962571.1.7027002891 en-US
n
Visually inspect the tension on the crawler tracks (E).
n
Check that the springs and dampeners move freely on the front wheel (F). Clean, if
necessary.
n
Check for loose screws and nuts.
18.5 Check Track Frames
n
Check for signs of leakage on the traction gears (A).
n
Pump grease into the grease nipples (B).
n
Check for signs of leakage on the front wheel (C) and damper.
n
Check the position of the damper (D).
Replace the chain if the slide block sticks out more than 50 mm (1.9 in.) outside the
frame.
n
Tighten all attachments.
18.6 Check Track Frames
n
Check oil level on the traction gear (A).
Position the level plug on the traction gear at 9 o'clock to check the level of the oil.
n
Check for signs of leakage on the track rollers (B).
n
Check for signs of leakage on the carrier roller (C).
n
Check for any damage to the frame.
n
Tighten all attachments.

Epiroc SmartROC T40 Specifications

General

Brand	Epiroc
Model	SmartROC T40
Category	Industrial Equipment
Language	English