Epiroc SmartROC T40 - Check Rock Drill or Rotation Unit; Check Drill Rod Support

SmartROC T35/T40 9 Feed Unit
45 No: 7026962571.1.7027002891 en-US
9.11 Check Rock Drill or Rotation Unit
n
Check and tighten all bolted joints.
n
Check and adjust the tension of the ropes.
n
Check all hoses for leakage.
n
Tighten and adjust the tension of the hoses if necessary.
n
Check and adjust the slide rail alignment on the feed beam.
9.12 Check Drill Rod Support
n
Check attachment and direction of the drill rod support attachment (A).
n
Check that the tightening torque of the drill rod support attachment (A).
n
Check that bolted joints (B) are properly tightened.
n
Check the slide pieces (C) for wear.
Component Tightening Torque
Drill rod support attachment 185 Nm (136 lbf.ft)