SmartROC T35/T40 9 Feed Unit
35 No: 7026962571.1.7027002891 en-US
9.5 Check Feed
n
Check feed cylinder (A) for leaks.
n
Check haul and return wire ropes (B) for lubrication. Adjust tension.
n
Check mounting and function of limit switches (C).
n
Check for wear on the intermediate drill rod support bearing (D) and replace as nec-
essary.
n
Check feed beam (E) for wear and damage.
n
Check rock drill (F) for installing. Tighten bolted joints.
n
Check hydraulic hoses (G) for wear and tension.
n
Check lubrication and wear on water hose drum bearing (H).
n
Check rock drill cradle (J) for installing, play, leaks, and damage.
n
Check drill rod support halves (K) for wear.
n
Tighten bolted joints (L).
To Next Page
Loading...
