SmartROC T35/T40 17 Compressed Air System
102 No: 7026962571.1.7027002891 en-US
17.5 Check Compressor Components
n
Check for signs of oil or water or air leakage on the compressor (A).
n
Check connections and couplings on intake manifolds (B) on the air filters for com-
pressor and diesel engine.
17.6 Oil Change and Oil Filter Replacement
Oil grade and operating temperature determines the intervals for oil change. The pre-
scribed interval is based on an oil temperature of up to 120 ºC (248 ºF) and normal operat-
ing conditions. Oil must be changed more frequently when working in high ambient temper-
atures or dusty or damp conditions.
The system must be flushed clean before new oil is filled if the oil is
• Contaminated by incorrect oil.
• Broken down due to excessive temperature.
• Used beyond the operating interval.
To Next Page
Loading...
Need help?
General
