Epiroc SmartROC T40 - Firefighting Equipment and Procedures

SmartROC T35/T40 7 Operator Environment
23 No: 7026962571.1.7027002891 en-US
7 Operator Environment
7.1 Check Cab
n
Clean or change the filter elements (C) in the circulation filters (A) and (B).
n
Clean or change the primary filter (D).
n
Clean or change the prefilter (E).
n
Run the air conditioning system for 5 minutes.
n
Clean the condenser element with compressed air.
n
Check that the instructions on the fire extinguisher (F) are legible.
n
Check the mounting on steps (G) for cracks and other damage.
n
Check the mounting on the handle for cracks and other damage.
n
Check the protective roof mountings for damage.
n
Check that the horn is working.
n
Check function of the reversing alarm signal and beacon.
n
Check that all warning and safety labels are properly attached and legible.