SmartROC T35/T40 1 Introduction
9 No: 7026962571.1.7027002891 en-US
1 Introduction
1.1 Safety First
Always read the information in the Safety manual before starting to use the machine or
starting maintenance work.
1.2 The Purpose of This Publication
The objective of these maintenance instructions is to detect and correct the faults at an
early stage so that breakdowns, costly secondary damage, and accidents can be pre-
vented.
Regular maintenance is a precondition for planning necessary interruptions in operation
such as reconditioning and repairs.
The publication allows maintenance to be carried out when most suitable regarding pro-
duction instead of causing a complete breakdown.
1.3 Target Group
The information in this publication is intended for everyone involved in the application, op-
eration, and maintenance of the machine and related equipment. All readers are expected
to possess basic competence regarding mining methods, construction methods, and the
machines used for that kind of operation.
1.4 Product Warranty
The product warranty relies on correct use, maintenance, and repair of the machine and its
components at all times.
• Use only Epiroc original parts. Any damage or operational interruptions caused by us-
ing spare parts of other manufactures than Epiroc will not be covered by warranty.
• Epiroc is not liable for any damage caused by unauthorized modification to the ma-
chine and its equipment.
• Epiroc is not liable for damage caused by inappropriate use.
• Overloading the machine can result in damage to the structure which is not noticed
during normal usage. Such damage is not covered by the warranty.
• Damage that occurs as a result of inadequate maintenance, substandard repairs, or
damage to equipment that is attributable to older unrepaired damage, is not covered
by the warranty.
• Read Epiroc policy warranty.
To Next Page
Loading...
Need help?
General
