Epiroc SmartROC T40 Maintenance

SmartROC T35/T40 9 Feed Unit
50 No: 7026962571.1.7027002891 en-US
WARNING
Heavy Objects
Can cause crushing injury or death.
u Do not stand under the heavy object being lifted.
u Use adequate lifting equipment.
WARNING
Moving Parts
Can cause personal injury.
u Shut off the machine and lock the battery isolation switch before starting any work.
u Make sure that the hydraulic pump is off and that the system is depressurized before
starting work.
Spacer Measurement (SP) 492 mm (19.37 in)
Table3: Spacer Measurement (SP)
Precondition
p
Spacer measurement (SP) is noted, so the bushing can be replaced in the same posi-
tion.
1.
Remove the plastic plugs (A).
2.
Remove the bolts (B) from the bushing.
3.
Place the bolts (B) into the threaded holes, were the plastic plugs (A) were removed
from, and pull them alternately until the bushing are separated.

Epiroc SmartROC T40 Specifications

General

Brand	Epiroc
Model	SmartROC T40
Category	Industrial Equipment
Language	English