SmartROC T35/T40 13 Diesel Engine
77 No: 7026962571.1.7027002891 en-US
Placement of oil filter can differ depending on brand and model.
!
NOTE: Use engine oil that the engine manufacturer approves for engine and type of
operation.
!
NOTE: Always replace oil filter when replacing oil.
Precondition
p
The engine oil is drained.
1.
Place a vessel under the oil filter.
2.
Remove the oil filter.
3.
Clean the surface of the filter holder.
4.
Lubricate the gasket of the new oil filter.
5.
Turn the filter by hand until the gasket makes contact with the filter base.
6.
Tighten the filter.
See Reference Documentation
Diesel engine instruction manual
To Next Page
Loading...
