Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Routing FFC/cables 203
Confidential
Note " * " : See Fig. 4-196 for the connector positions on the Main Board.
Figure 4-208. PE Sensor Cable
No. FFC/cable name CN No.
*
Remarks
1 PE Sensor Cable CN9 Ferrite core x1
To Transmission Holder Assy
Dowel
To Main Board
Ferrite core
PE Sensor cable:
Route this through the dowel and
hook of the Base Frame, and put
the ferrite core in the Base Frame.
Hook
To Next Page
Loading...
