Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Routing FFC/cables 202
Confidential
ROUTING THROUGH THE FFC HOLDER
See Fig. 4-196 for the connector positions on the Main Board.
Figure 4-206. Routing to the FFC Holder
ROUTING AROUND THE PRINTER MECHANISM
Note * :See Fig. 4-196 for the connector positions on the Main Board.
Figure 4-207. PF Motor Cable, Power Supply Unit Cable
(Continued to the next page.)
No. FFC/cable name CN No.
*
Remarks
1 CR Encoder FFC CN6 ---
2 Head FFC (x4) CN1,2,3,4 ---
Rib
Hole
Fold line
Insert the CR Encoder FFC and
Head FFCs (x4) together to the rib
on the FFC Holder and the hole.
FFC Holder
Ink Supply Tube Assy
Cover the Ink Supply Tube Assy with
the CR Encoder FFC and Head FFCs
(x4), and secure them to the FFC Holder.
No. FFC/cable name CN No.
*
Remarks
1 PF Motor Cable CN22 Ferrite core x1
2 Power Supply Unit cable CN501 ---
Power Supply Unit cable:
Route this through the groove of the Base
Frame, and secure it with acetate tape.
Relay Connector
Do not let this get caught.
Right
side
PF Motor cable:
Place the relay connector to the hole on the
Base Frame, and route the cable through
the hooks (x3) and the groove (x1).
Hook
Groove
To Next Page
Loading...
