Epson WF-C5210 - Page 384

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Disassembly/assembly Disassembly/Reassembly Procedures 384
Confidential
ADF/SCN Unit
3. Open the ADF/SCN Unit.
4. Remove the two screws (S4: ), then remove the ADF/SCN Unit in the direction of the
arrow.
 Before screwing the ADF/SCN Unit, make sure the hinges are properly attached in place.
 If the ADF/SCN Unit is opened when the hinges are NOT secured, the unit may be damaged.
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
ADF/SCN Unit
45 °
Slide the Wasted Ink Duct Holder
1. Remove the screws (S4: ) that secure the Wasted Ink Duct Holder.
2. Disengage the hook, and slide the Wasted Ink Duct Holder to rear.
B8
C8 D8
Wasted Ink Duct Holder
Hook
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C