Epson WF-C5210 - Page 385

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Disassembly/assembly Disassembly/Reassembly Procedures 385
Confidential
Inksystem Unit
C H E C K
P O I N T
Before removing the Inksystem Unit, release the carriage lock, and then move the CR
Unit to center of the printer.
In the next step, waste ink may spill from the Wasted Ink Tube. Prepare waste cloths
or similar in advance.
1. Slide the tube clamp, and remove the Wasted Ink Tube from the Wasted Ink Duct Holder.
B9
D9
Tube clamp
Wasted Ink Tube
Wasted Ink Duct Holder
Inksystem Unit
2. Remove the three screws (S5: ), then remove the Upper Cap Frame.
Secure the grounding cables together with the screws.
3. Disconnect the cable from the relay connector.
No. Screw Type
S5
C.B.S-TITE-SCREW-3x6-F.ZN-3C
Relay connector
Cable
Grounding cable
Grounding cable
Upper Cap Frame
Top