Epson WF-C5210 Service Manual

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Adjustment Adjustment and Inspection Details 561
Confidential

PG adjustment procedure
1. Loosen the two fixing screws of the PG adjustment cam positioned on the left
and right, and the four fixing screws of the CR guide frame.
Figure 7-3. PG Adjustment Cam
2. Move the CR unit to the center of the printer.
3. Place the thickness gauge (1.42 mm thickness gauge + 0.08 mm Teflon tape)
at position A shown in Figure 7-4.
Figure 7-4. Placement of Thickness Gauge
When performing the PG adjustment, make sure of the following.
 Move the CR Unit by pulling the CR timing belt.
 Be careful not to damage the nozzle surface of the
Printhead with the thickness gauge.
 When make the Printhead touch the thickness gauge, be
careful not to let the Printhead run onto the gauge.
HP side
PG: Large
PG: Small
Right PG
adjustment cam
Full digit side
PG: Large
PG: Small
Left PG adjustment
cam
A
HP side
B
Full digit side
Thickness gauge

Epson WF-C5210 Specifications

General

Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Operating System Support	Windows, Mac OS, Linux
Functions	Print
Ink Type	DURABrite Ultra Pigment Ink
Ink Colors	Black, Cyan, Magenta, Yellow
Print Technology	PrecisionCore
Monthly Duty Cycle	45, 000 pages
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Display	2.4" color LCD
Print Speed	Up to 24 ppm (black/color)
Input Tray Capacity	250 sheets