System 5 Digital Audio Mixing System Operation Manual Channels and Strips
104
Knob and Fader Text Displays
There are nine options in the Strips Config Panel to choose between values and names
on the text displays for knobs and faders:
• Knobs - momentary, show name or show value
• Fader - momentary, show name or show value
• 402 Faders - momentary, show name or show value
Fader Meters
The Fader Meters: parameter controls what the Strip fader’s LEDs measure and can
be set using the keys that appear below and indented from the Fader Meters: key.
Off: Turns the Fader Meters off so nothing is displayed.
Metering: Displays the channel’s input level on the right meter only. This is the PFL
input level, not the fader position.
Automation: Displays the underlying fader position while recording automation.
When the fader is punched out, the LEDs turn off. In Write Abs mode, the underlying
absolute level is displayed while recording new automation. Underlying levels are also
displayed when a fader is in Preview or Suspend modes while touching the fader. See
Automation Modes on page 181.
To Next Page
Loading...
Need help?
General
