System 5 Digital Audio Mixing System Operation Manual
25
Chapter 2: New Features in eMix Version 3.0
This section lists new and updated features in the eMix versions 3.0 software. Cross-
references link to that feature’s discussion in the manual.
Scene Automation
Scene Automation allows the manual triggering of a single snapshot, or a sequence of
snapshots. Cross-fading to a scene can be programmed by setting fader/knob glide
times. A delay time between scenes can also be programmed.
.
See page 149.
Enhanced Logging Capabilities
Enhanced logging capabilities capture a larger data set, including snapshot and lay-
out recall events. The System Computer log history will be available over multiple
system reboots with a new Rotating Log feature.
Longer Delay Function (DF66 only)
A longer delay function of up to 2 seconds with 3 separate display options (frames,
samples, and seconds).
Bus Processing (DF66 only)
User-assignable Bus Processing functionality is added to Bus Sections, Group Busses,
and Aux Busses. These functions include a limiter, compressor, and filters. Busses
are now directily available on the surface and can be automated.
DF66 Super Core
Support for the DF66 Super Core DSP platform.
See page 23.
See pages 106 and 115.
See page 94.
Auto-Update of DSP Software (DF66 only)
The DF66 will automatically check the System PC’s software version and update its
own software version if necessary to insure compatiblilty.
To Next Page
Loading...
Need help?
General
