Euphonix System 5 User Manual

System 5 Digital Audio Mixing System Operation Manual GPI/O Event System
170
13.9.2 Move a Fader to Turn On the Floor Monitors
This example demonstrates how to turn on the floor monitors by moving any one of
several faders below a selected level.
1. In the Event Configuration window, under Event List, click on the <click to
add event> field.
The Add Event dialog appears.
2. Select OR as the logical operator from the dropdown menu.
3. Under Input, click on the <click to add input> field.
The Add Input Event dialog appears.
4. Select Fader from the dropdown menu and click OK.
5. Configure the Input Properties to the following settings:
Channel # 1
Activation level (dB) -50
Activation Type Below
6. Repeat steps 3–5 for any additional channel faders and set the Channel # in
step 5 to the new channel number.
7. Under Output, click on the <click to add output> field.
The Add Output Event dialog appears.
8. Select Control Room from the dropdown menu and click OK.
9. Configure the Output Properties to the following settings:
Action Monitor A
Active State On

Euphonix System 5 Specifications

General

Brand	Euphonix
Model	System 5
Category	Music Mixer
Language	English