Euphonix System 5 User Manual

System 5 Digital Audio Mixing System Operation Manual Machine Control
160
12.3 Track Arming
Track arming from System 5 is controlled in the Machine Setup Panel (Figure 12-5).
Press the Machine Setup button from the Main Panel. The Record in Motion,
Track Arm in Motion, On Transport Stop, and Arm While Stopped each have
two, mutually exclusive settings.
The serial port of the TT002 (v3.0x or newer software) can provide up to 48 channels of
track arming. Track arming and record tally information is sent to the console and is
used to generate a true track status tally on the surface (top of CM402T and record pad-
dles in CM403):
• flashing = armed
• solid = recording
Figure 12-5 Machine Setup Panel
Main
Panel
Record in Motion:
Info
Machines-Setup
Play+Rec
Track Arm in Motion:
Arm Only
On Transport Stop:
Disarm
Arm While Stopped:
Allowed
Name Auto
Rec Only
Arm+Rec
Stay Armed
Not Allowed
TC Lock: 200 ms
Mach
Page
Auto Punch:
Locate

Euphonix System 5 Specifications

General

Brand	Euphonix
Model	System 5
Category	Music Mixer
Language	English