System 5 Digital Audio Mixing System Operation Manual Channels and Strips
126
8.4.5 Pan
System 5 panning allows multiple pan formats (also called pan laws): mono, stereo,
LCR, LCRS, 5.1, 6.1, and 7.1.
A single panner can control several different Mix or Group busses at once, each with dif-
ferent formats. See Section 7.3 - Mix and Group Bus Setup to learn how to assign Mix
and Group Bus formats.
Pan Knobsets
Press the Pan function key to assign the Pan parameters to the knobset (Figure 8-18).
See Section 8.5.1 - Group Bus Routing and/or Section 8.5.2 - Mix Bus Routing to review
how to use the Pan to: switch to insert Pan.
Figure 8-18 Pan Knobsets
Page keys display
other Pan pages
)2egap(naP)1egap(naP
Rot8
FocF
DivF
NonB
Boom
PanR
Srnd
PanF
DivS
FocS
DivR
FocR
Rotate
Focus front
Divergence front
non-Boom level
Boom level
Pan rear
Front:Surround Pan
Pan front
on/off
on/off
on/off
in/out
in/out
in/out
in/out
Width
in/out
Divergence Surround
Focus Surround
Divergence Rear
Focus Rear
in/out
in/out
in/out
in/out