Euphonix System 5 User Manual

System 5 Digital Audio Mixing System Operation Manual CM401T Master Section
74
5.3 Solo
System 5 has an extensive solo control system that is accessed from the center section.
Press the Solo Ctrl switch in the master Solo section to display the Solo Control Panel.
Figure 5-9 Master Solo section (top-left) and Solo Control Panel
5.3.1 Solo Mode
The three Solo modes can be selected by pressing their respective switches in the Solo
Control Panel. Selecting one mode deselects the previous mode.
APL (After-Pan Listen): Signal is post-fader and pan (stereo)
PFL (Pre-Fader Listen): Signal is pre-fader in mono
SIP (Solo-In-Place): Allows Solo channels through to the mix busses. Mutes all channels
not soloed but not channels designated Solo-Safe (page 76). This mode allows monitor-
ing soloed channels with panning and effects if the effects returns have been designated
Solo-Safe. We do not recommend this destructive solo mode for live broadcast or for
recording a mix or dub.
Film Mode: Switches any mix busses in playback to bus temporarily so an SIP solo can
be heard.
Main
Panel
Info
Solo
Momentary
Summing
I/C
APL
PFL
SIP
Clear
Film Mode
Backstop PFL
Solo-Safe
DimCR
Solo>None
Solo>Alt1
Solo>Alt2
Solo>Flw
Solo

Euphonix System 5 Specifications

General

Brand	Euphonix
Model	System 5
Category	Music Mixer
Language	English