Flexim FLUXUS G608 User Manual

122 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x 17 Settings
17 Settings
17.1 Time and Date
The transmitter has a battery-powered clock. Measured values are automatically stored
with the date and time.
17.1.1 Time
17.1.2 Date
After the time has been set, DATE is displayed.
Select Special Funct.\SYSTEM settings \ Set
Clock. Press ENTER.
The current time is displayed. Select ok to confirm the time
or new to set the time. Press ENTER.
Select the digit to be edited with key and .
Edit the selected digit with key and . Press EN-
TER.
The new time is displayed. Select ok to confirm the time or
new to set the time again. Press ENTER.
Select ok to confirm the date or new to set the date. Press
ENTER.
Select the digit to be edited with key and .
Edit the selected digit with key and . Press EN-
TER.
The new date is displayed. Select ok to confirm the date or
new to set the date again. Press ENTER.
SYSTEM settings ↕
Set Clock
TIME 11:00
ok >NEW<
TIME 11:00
Set Time !
-
O
+ O
ON
O
OFF
O
TIME 11:11
>OK< new
DATE 2011-01-25
ok >NEW<
DATE 2011-01-25
Set Date !
-
O
+ O
ON
O
OFF
O
DATE 2011-01-26
>OK< new

Flexim FLUXUS G608 Specifications

General

Brand	Flexim
Model	FLUXUS G608
Category	Measuring Instruments
Language	English